BDVPM - TT-P-664C RUST INHIBITING PRIMER,COMPL.

  • MSDS: BDVPM
  • Manufacturer: AMERON INDUSTRIAL COATINGS DIV
  • Product Name: TT-P-664C RUST INHIBITING PRIMER,COMPL.
  • National Stock Number: 8010-00-292-1127
Product Identification

Product ID:TT-P-664C RUST INHIBITING PRIMER,COMPL.
MSDS Date:01/01/1985
FSC:8010
NIIN:00-292-1127
MSDS Number: BDVPM

Responsible Party
AMERON INDUSTRIAL COATINGS DIVISION
201 N BERRY ST
BREA, CA 92621-3904
US

Emergency Phone: 714-529-4597

Info Phone: 714-529-4597

Cage: 09869

Contractor
AMERON INDUSTRIAL COATINGS DIVISION
BREA, CA 92621-3904 US

Telephone: 714-529-4597

Cage: 09869

Ingredients

ETHYL BENZENE (SARA III)

CAS: 100-41-4

RTECS: DA0700000

Fraction By Weight: <5%

OSHA PEL 100 PPM/125 STEL

ACGIH TLV: 100 PPM/125STEL 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOBUTYL ALCOHOL (SARA III)

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: <5%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: <5%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5-15%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


PRIMARY AMYL ALCOHOL

CAS: 71-41-0

RTECS: SB9800000

Fraction By Weight: <5%

ACGIH TLV: 100 PPM (MFR)

Hazards

Effects of Overexposure:SKIN/EYE:IRRIT. INHALATION: ANESTHETIC,IRRIT OF
RESP TRACT,CNS DEPRESSION,HEADACHE,DIZZINESS,COMA

First Aid

First Aid:EYE:FLUSH WITH WATER 15 MIN,CALL A PHYSICIAN.SKIN:WASH WITH
SOAP AND WATER,REMOVE CONTAMINATED CLOTHING.INHALATION:REMOVE TO
FRESH AIR,RESTORE BREATHING IF NEEDED,CALL A PHYSICIAN.

Fire Fighting

Flash Point:44F/+6C (TCC)
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL OR POLYMER FOAM
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER FOG TO COOL EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS EXPOSED TO HEAT MAY
EXPLODE

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID BREATHING
VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C OR NEAR
HEAT,SPARKS,OPEN FLAMES. GROUND CONTAINERS WHEN POURING,AVOID FREE
FALL IN EXCESS OF A FEW INCHES.
Other Precautions:DO NOT TAKE INTERNALLY. DO NOT FLAME CUT,BRAZE OR
WELD COATED MATERIAL WITHOUT NIOSH/MSHA APPROVED RESP DEVICE OR
APPROPRIATE VENTILATION.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL MECHANICAL EXHAUST
Protective Gloves:REQUIRED
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:PROTECTIVE CLOTHING TO PREVENT SKIN CONTACT
Supplemental Safety and Health
ADD INGREDENT: VARNISH MAKERS & PAINTERS NAPHTHA,10-20%,TLV: 300 PPM.
CONTAINER SIZE:1 GAL CAN

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:23F/106C
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:63

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY.DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.